Westport Machine Works

The "POP-IT" hydraulic press is a work center with a vise and a 10 ton hydraulic system. Using the POP-IT in either the horizontal or the vertical position enables the removal and installation of component parts such as, U-joints, center bearings, midship yokes, and slip yokes. Patent #DES. 398,827

Socket Chuck Yoke Fixtures fit the 2-1/4" socket chuck style machines. The Socket Chuck Yoke Fixtures are pre-balanced and come with the strap kit. Socket Chuck Yoke Fixtures are available in sizes from 1210 through 1810 and SPL and RPL. Please call for pricing.

How does the fixturing work? The machine spindles have a female pilot and the fixtures have a male pilot. The fixtures fit into the machine spindles and bolt together with two bolts. The fitting together of the pilot, the face of the fixture and the face of the spindle, creates a sandwich type fit that ensures a long fixture life. There are yoke fixtures, flange fixtures, and some other fixtures like the ball type fixture. They all bolt to the machine spindles using two hex head bolts or two socket head cap screws depending on the type of fixture. Using these fixtures is how you will hold the customers' driveline in the machine.

PRESS-WELD-STRAIGHTEN-BALANCE ALL IN ONE MACHINE Specifications: Full length 17' tool tray for operator convenience 17' base... 12" swing 3 HP AC motor 0-3000 RPM digital display 15 ton hydraulic system 220 Single Phase 1000 lb. weight capacity Footprint: 204" x 20" Weight: 2500 lbs. See more

NON-CONTACT SENSOR SYSTEM FOR AUTOMATED OUT-OF-BALANCE DETECTION The Shaftmaker G3 is an electronic balancer that uses non-contact sensors for automated out-of-balance detection. The sensors are permanently mounted and do not require operator adjustment. When the Shaftmaker G3 is in the testing process, the sensors determine the out-of-balance at the head spindle and the tail spindle, displaying the out-of-balance amount of both on the LED screen. When the testing process is ...finished, the machine comes to a stop, then rotates the end with the most runout to the top dead center position for weight placement. Non-contact sensor system for automated out-of-balance detection 17' base 12" swing 3 HP AC motor 0-3000 RPM Dynamic breaking 220 three phase power Servo drive with HMI control key pad 15 ton hydraulic system 1000 lb. weight capacity Machine weight: 3000 lbs. 150" spindle face-to-face Length 18'6", width 3', height 5'4"