VH Geomembrane Inspections QA LLC

Beginning a project always give us new hopes, we start with new spirit, with the wish to give the best of everyone every day. After four months of hard work the spirit is down, but we are hold by the wish of finish and give the best product to our client.

The good or bad subgrade conditions are critical and decisive for good installation and life of the geomembrane, Any problems that the QA inspector report regarding the subgrade is preferable to solve it immediately and not wait for that future spills reminded us that something is broken in the liner. Check out the following conditions should avoid over the subgrade.

FOR RELAXATION LINER CREW PLAY FOOTBALL AT THE LOCAL PARK WITH THE DELTA TEAM.

During fusion welding process, it is very common the overheat in the geomembrane causing burns out. Both the operator of the wedge and the inspector must be well trained, the first to solve this kind of problem and the second for detect the problems. Some burns can be very obvious but at other times they are almost imperceptible to the naked eye.

VACUUM TEST OPERATION IS FOR EXTRUSION WELDING, IS REALLY IMPORTANT FOR DETECT LIKING ON THE EXTRUSION WELD.

COMMON ERRORS WORKING WITH GEONET