J&M Products

Newest parts from J&M Products https://hotpart.com//2015-pres-mustang-sport-springs-jm-p/

Back at it Laguna Seca. Hopefully the Chip Ganassi Racing Ford's have a better race this year!

J&M Products - Hotpart.com New S550 Ford Mustang Bumpsteer Kit https://hotpart.com//2015-2019-ford-mustang-adjustable-bu/

J&M Products Height Adjustable Panhard Rod Relocation Kit Made In The USA! Part # 20246 1982-2002 Camaro /Firebird Relocation Kit... J&M Products designed this 3rd and 4th Generation F-body adjustable competition leveling and lowering panhard bar kit. The kit’s designed to increase exhaust clearance while lowering and leveling the panhard bar for greater performance. This proven competition setup includes an adjustable brace to prevent deflection and lateral movement of the driver’s side bracket system. Precision CNC laser cut and formed brackets with adjusting slots which allows you to lower your roll center by lowering and leveling the panhard bar giving you greatest in performance tuning. Lowering the roll center with this kit gives you better cornering, better overall stability, and corner exit traction. In almost every case with how long the panhard rod is it will give you better performance compared to the more expensive watts link systems with a lower cost, better adjustability, and easier installation. 100% designed and manufactured by J&M Products with pride in the USA. Features: Works with stock and most aftermarket sway bars. Factory axle tube size only. Infinitely adjustable roll center height from 1.75 and 4.00 lower. 100% bolt-in for street use. Competition use requires welding. Panhard bar upper brace is built using 1.25 USA DOM tubing. CNC Laser cut and formed brackets. Adjustable panhard bar height to allow for perfect leveling and roll center changes. Powder coated in either red or black. Allows for fine tuning roll center while at the track. Watts linkage and factory located panhard rods are typically to high for performance use. Lowering the (roll center) panhard bar reduces mid-corner oversteer. Raising the (roll center) panhard bar increases mid-corner oversteer. Fits: 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 Chevrolet Camaro and Pontiac Firebird F-Body Cars.

2015-2019 S550 Ford Mustang Adjustable Rear Upper Shock Mounts Fits all 10mm & 12mm shocks (use part number 25351 for Ohlins’ shocks) Made In The USA!... J&M Products manufactures these performance shock mounts from high strength grade 50 steel and then fully TIG welds them. These high strength bearing mounts replace the weak cast aluminum shock mount. Unlike factory the J&M mounts use a specially designed heat treated Chrome-Moly spherical bearing that stops the deflection caused by the soft rubber bushing. By removing the rubber J&M mounts eliminate the deflection that gives the car a bouncy feeling when using stiffer shocks or lowering springs. These rear mounts also come with a LIFETIME WARRANTY. Features: - High Strength Grade 50 Steel 100% TIG Welded - Heat Treated Chrome-Moly Spherical Bearing - Strongest Bearing Liner Made From Sintered Bronze impregnated With PTFE - Strongest Bearing Rated at 78,000 lbs (Made Specific To This Application) - Over 1/2 Extra Clearance For Wider Wheels & Tires - Works With All Rear Shocks - Height Adjustable For Extra Bump Travel - Lifetime Warranty - Fits: 2015, 2016, 2017, 2018, 2019 All Ford Mustangs including MagneRide.