Fontana Motorsports

75 G10 build...

http://www.lsxmag.com//upgrading-a-sixth-gen-camaro-with-/

time to get this one out of here 77 Macho 400 4v......

fun with the Chrysler 3.5......the typical....changing out rocker shafts.....

getting the BULLITT Charger back together. rebuilt the 440, reworked the floor and unit body for the Richmond ROD, installed a McLeod dual disc clutch, and going with FITECH EFI with a Tanksinc tank with a built in fuel pump and using a LS1 fuel filter/regulator.... also converting the car to A/C and changing over to 70- disc brakes and changing out the aftermarket booster for a original Booster and master correct to the car.....

Some work on a LTD LX today...

The Bullitt Charger, fixed,modified and reinforced the tunnel and torsionbar crossmember that was butchered out by another shop to fit a Richmond 6 speed used a modified E body tunnel since the shifter is a non factory location...not a fan of this transmission for fit in a Mopar but it's what the customer had installed....Now to pull the motor and pull it apart and balance the rotating assembly..

Freshened up late model 5.0 ready to go in the 2nd gen Econoline.....

MGW MT-82 race spec shifter install in the shop GT...

Dodge van fun day.... 78 B200 360 4bbl.....Oil pan,and front cover swap, chain and gears....Loaded with A/C, P/S,and Smog Pump....

71 Econoline. Here for a swap, 302, 3 on the tree to a roller 5.0 and a AOD trans conversion.