Vino Cellars & Accessories

We had the privilege of working with developer - Elizabeth Benton in Indian Wells, CA. We designed this contemporary wine cellar using chrome plated vintage view racking system. Each rack held 3 bottles deep and were attached to floor to ceiling mount frames. Total capacity held 648 bottles. Racking cost - $7600 The glass and cooler were supplied and installed by her team. When building a glass cellar, the door must have a seal and the cooler should be strong enough to handle proper temperature. Contact us if you would like a load calculation done to see what cooler would work best for your cellar. Check out the rest of this amazing home! http://www.vintageclubsales.com/75105-Pepperwood-Drive

Custom Cabinet: 3 Door Masterpiece cabinet with Classic windows (completed 12/18) Customer had an open alcove space approximately 83" high x 71" wide x 30" deep and wanted to fill it up with a temperature controlled wine storage system. We custom designed their cabinet to be 3 doors wide, custom grey paint, redwood racks, approximately 475 bottle capacity, front top vent cooling system that requires minimal clearance around the top and sides. Cabinet was built 82" high x 70" wide x 28 1/2" deep and our installers finished it off with a trim kit for a built in look. This cabinet series can ship fully assembled and ready to slide in place. We design and ship across the U.S. Approximate cost - $15,000. If you would like a design and quote for your alcove or wall, send us your dimensions so we can help!

Our lovely customer sent over some photos of her credenza that was recently delivered. We built this 5 door credenza in Oak with an Espresso stain, style A classic windows, low heat lights, 352 bottle capacity, locks, and upgraded cooling unit. These credenzas can be built in single depth 21 1/2" or double depth 29 1/2". Click the link for more details http://www.winecabinets.com/5-Dr-Credenza-p/5-dr-cred.htm

Huntington Beach, CA - Here is a great option for those that have extra space under their stairway. Our client cut into his wall and had 59 3/4" width of space that angled from 62" high down to 17 1/2" high. He also had plenty of depth (35") that allowed us to design double deep racking to hold 220 bottles. The custom doors were built in knotty alder, custom stain matched, double pane insulated glass, and included casings. The racks were built in natural alder wood. The cooler was installed behind the racks and venting to adjacent area. Production time can typically take 5-8 weeks for custom doors. If you are interested in a design and quote, send us over your dimensions and we will be happy to assist you.

Alamo, CA - Gorgeous custom home included an area for a custom wine cellar. We designed the area with Ultra peg metal racks with stained alder back panels (held 244 bottles). Behind the panels we installed led strip lights. The lower section included wooden alder diamond kit racks and table top with grey stain and lacquer (held 360 bottles).