San Pedro Automotive

We have all seen "your brain on drugs", this is your engine on sludge! The heating and cooling engine oil goes through takes a toll on the oils viscosity, if le...ft unchanged for too long oil will start to solidify and eventually block passages that are needed for optimum lubrication of internal parts, without that your engine will eventually seize. Change your oil regularly to avoid sludge buildup. See more

Cabin air filters, do you know how clean the air is coming in you car through the vents?

Had this car with a massive clunk when you put it in gear.

Water is NOT a suitable substitute for coolant/antifreeze when you have a leak, it rusts and is corrosive. This poor truck is getting a used motor due to the damage caused by water in the cooling system.

Valve job on a 2000 Tacoma

Preventative maintenance! Let us change your oil before we have to change your engine. The sludge in the first 2 pics is due to a lack of maintenance.

Wiping everything down before and after we work on your car. Will be open all week. Come on down get that car ready...you never know.

Supporting youth sports in San Pedro.

We’re taking every precaution we can. We wipe the steering wheel down the shifter and the emergency brake handle before and after we work on it. And we wear gloves. Will be open keeping our 6 foot distance of course. Come on down and get the car ready for whatever comes our way

I thought I would let everybody know. Automotive shops are exempt all the stuff that’s going on now. We’ll be here all next week. We were really busy this week with people getting the car ready just in case. Give me a call 310-831-3700. We can take care of all of your automotive service needs. We wipe everything down before we work on the car with hand sanitizer. And then we wipe it down after we get done working on it. We wear gloves as well to make sure all common surfaces are clean when we get done. Again give us a call will get that car ready. Talk to you next week Mike

Valve job on a 2004 Subaru, engine has to come out to get the cylinder heads off.

Engine replacement on a Honda Pilot. Transmission and steering unit and subframe all had to come out to get engine out, now it's time to swap everything to the new engine.