Precision Electrical Services

my customers hubby tackled a honey do list to change the old A/C disconnect box. don’t trust hubby, call a pro! homeowners insurance will not replace your house if they find out hubby do did it!

About Permits. Do you need them for your project? What about if your just having a ceiling fan installed? How can permits or not getting them affect a property owner. ... How much do permits cost.. When it comes to electrical work. You are almost always required to get electrical permits. Any professional electrician typically goes over permits before your project is started. As soon as a wire is run. A fixture, outlet, switch etc installed in a new location. Most AHJ require you to pull permits. Even a single ceiling fan installed in a room that previously didn't have a fan would require a permit. We disclose this information with our customers initially as we create a contract. If you decline electrical permits this can affect you negatively in a few ways. .) If there is a loss and an insurance claim is made the insurance company may use unpermitted work as a reason to decline coverage. .) If your AHJ finds you have had unpermitted work done on your property they may place fines and or request the work is removed. .) Unpermitted work must be disclosed in the sale of your property and could affect its value We pull permits on a regular basis throughout Southern California. Generally for electrical work. Authorities will require a deposit of $100-5000 . The average electrical permit is $150-300 this $$ is paid to your local City for thier fees If plans are required we will add fees to pay an architect or draftsman for plans to be prepared Our fees (contractor fees) along this process are $30 per hour this includes creating and filing applications as well as inspections A typically ceiling fan such as todays installation would cost a customer $249 In this case the city collected an additional $141 for permit fees Contractor fees for the application, ruff electrical inspection and final inspection were $300 A single fan installation cost changes from $249 to $690 permitted.

Not exactly what I’d prefer to do to my house, but nothing a little paint can’t fix. Three quad outlets with two flood lights

-braced ceiling for 100 Lb fixture on 18ft ceiling -added wall switch with dimmer.

Decorated my house for Halloween. LED strip lights, great for Christmas, 4th of July, New Years, ect.....

Make sure your smoke detectors batteries are replaced and working because One simple loose wire on an outlet can cause this and more!

Julian loves shiny things.

Does this scare you?? It should!! For a limited time only, I'm offering panel reconditioning for the low price of $100 for all residents within a 15 mile radius of temecula Daniel page Precision electrical services (951)-870-7194... Service includes and only limited to: - Visual inspection of entire electrical meter/main panel (looking for double tapped breakers, damaged breakers, hot spots, burn marks, signs of overheating, loose breakers, loose wires, corrosion, damaged bus bars, wire gauge to breaker size, proper grounding and condition of cold water bond and condition of overhead service wires if applicable) - Retorque all breakers, neutral/ground bar and main lugs - clean any corrosion or oxidation Replace damaged breakers, nuetral/ground bar and or add breakers due to double tapping for an additional cost

Found this gem in the customers attic. Apparently, previous electrician/homeowner didn’t think it needed a junction box

100amp Disconnect and Tesla charger

6 front porch lights with front door pendent. Unfortunalty there was no attic access, so we had to route conduit and junction boxes under the eves to get power to each pillar. Still turned out great though! Harveston, Temecula.

Backyard 240volt wall heater with remote control switch and Bromic receiver which allows for wireless control