High Power Marine

Had to make a run at the UBF but then not break out. Fun run to the first pin.

Somehow this found its way to us last weekend.

Another custom V drive about ready to install. New bearings, seals, added a Whirl-a-Way, cleaned gears, re polished cases, ARP bolts.

Well while getting ready for the march race in La Paz in Az we found the dolly under the 757 boat was broken beyond repair. I was forced into having a new trailer built. Turned out awesome. Still need to finish but the frame is stout!!

Nothing like working on all V drives. And building v drives.

Customer brought over a harwood fiberglass scoop. He asked it we could make him a tray to mount it on his tunnel ram for his Ford. Instead of the usual bent up sheetmetal tray that hooks on with dezus fittings and can crack the scoop from vibrations. We opted to glass in the bottom and then make a 3/16 aluminum plate amd bolt to the new glassed floor of scoop and machine the aluminum to fit their application. Much cleaner look and no holes and clips on side of new scoop. Next will cut the holes for thw floats and counter sink the mounting holes for the plate to scoop.

Customer wants to clean up this 1972 Mandela flat bottom. Cut out old glass tanks and re glassed sides and floors where the fuel had destroyed old glass. Doing a new rudder box and replacing a turn fin.

Just getting in a new batch of V drive hardware. Lets get you boat ready.

Things dont always go according to plan. Sometimes you just have to start over??

Vey sad to be letting this one go. Built for my Son to play with at 14 years old. Very good but short memories in it. 78 Hondo GT runner.

High Power Marine is getting back into it.

Just wanted to see if the race boat ran? Its been sitting since march. Well.